30 Minute Timer

Thirty minutes for longer work periods, quizzes and indoor recess.

Work time
30:00
Ready for 30 minutes
Tap to pause · Esc to exit

Activity

Time

Station rotations

Warning chime at 1 minute left
Colors change as time runs out

Press Show to class for the board or projector. The disc shrinks and turns yellow, then red. Space starts and pauses. The screen stays awake while the timer runs.

What a 30 minute timer is good for in class

  • A long work period on a project.
  • A quiz or unit check.
  • Indoor recess or free choice time, so everyone knows when it ends.

Running one of these every day? See the test timer and quiet timer for set-up tips.

How the 30 minute timer looks on the board

The disc starts full and shrinks clockwise. Its colour tells the class how much time is left, even from the back of the room:

DiscClock showsMeaning
GreenFrom 30:00 down to 15:00More than half the time left
YellowFrom 15:00 down to 6:00Less than half left
RedThe last 6 minutesFinal 20 percent

Sounds

  • A soft two-note warning chime at 1:00 left (you can turn it off).
  • Three short blips at 0:03, 0:02 and 0:01.
  • A rising end chime, “Time's up!” on the board and a burst of confetti (skipped if your device is set to reduce motion).

Splitting 30 minutes into parts

For a long session, Station rotations can split the time into parts with a short break between them. Some ways to divide 30 minutes of work, with 2 minute breaks added between parts:

PartsEachBreaksTotal
215 min2 min32:00
310 min4 min34:00
47 min6 min34:00

Questions teachers ask

When does the 30 minute timer turn yellow and red?

Yellow with 15:00 left and red with 6:00 left. The warning chime plays once at 1:00.

How do I start a 30 minute timer?

This page is already set to 30:00. Press Start or the space bar. To put it on the board, press Show to class: the controls disappear and the timer fills the screen. Tap the screen to pause, press Esc to exit.

What sounds does the 30 minute timer make?

A warning chime at 1:00 left, then 3-2-1 blips and an end chime. Sound only starts after you press a button, and the speaker button mutes everything.

Other timer lengths